Now Serving All of Indiana - Licensed electricians dispatched from Indianapolis.

Emergency calls welcome: (317) 680-7907

Knob and Tube Wiring Replacement

Outdated wiring puts your home at risk — Kochs Electric replaces knob and tube systems with safe, code-compliant wiring built for modern electrical demands. Our electrical services help homeowners bring their house up to code and keep it protected for years ahead.

State Licensed
Master Electricians
Permit & Inspection Handled
24-Hour Emergency Line
Workmanship Guaranteed

Licensed, Bonded & Insured

NEC Code Compliant

Same-Day Emergency Response

Permits Pulled & Inspections Managed

Workmanship Guarantee

Serving All of Indiana

5 Highlights on Knob and Tube Wiring Replacement

Full rewiring from panel to outlet

Kochs Electric replaces every knob and tube circuit in your home, running new copper conductors through conduit or as NMB Romex cable, and connecting each run to a properly rated breaker in your updated service panel.

AFCI and GFCI protection included

Every replacement circuit gets arc fault circuit interrupter and ground fault circuit interrupter protection where the NEC requires it, giving your home overcurrent protection that knob and tube systems simply can’t provide.

Grounded, polarized receptacles throughout

Old knob and tube wiring is ungrounded and unpolarized. Replacement wiring installs grounded, polarized outlets that meet current residential code requirements.

Licensed master electricians on every job

Kochs Electric sends licensed, certified journeymen and master electricians — not apprentices working unsupervised — to inspect, diagnose, and rewire your home.

Permit pulled and inspection passed

Every knob and tube replacement project includes permit filing and a final inspection, so your work is documented, compliant, and insurable.

460+
Homes Serviced
92%
Same-Day Response
4+
Years of Experience
100%
Code-Compliant Work

Why Choose Our Knob and Tube Wiring Replacement

Founded by Master Electrician David Koch (Indiana License #EC21400047) and serving Indiana homeowners since 2008, Kochs Electric has replaced knob and tube wiring in hundreds of residential and commercial properties. We carry general liability and workers’ compensation insurance on every job. That experience matters when your walls are open and your home is de-energized. Our team delivers residential services with the same care and precision on every job, whether it’s a single circuit or a full-house rewire.

We don’t cut corners on conductor gauge. We match AWG ratings to the load on every circuit, whether that’s a 15-amp branch circuit feeding a bedroom or a 20-amp circuit serving a kitchen receptacle. Every splice is made inside a proper junction box — never buried in a wall cavity.

Our electricians troubleshoot before they pull wire. We test each existing circuit with a multimeter and voltmeter to map what’s live, what’s dead, and what’s already been partially replaced. That diagnostic step saves time and prevents surprises once we start the rewiring.

We’re fully licensed, bonded, and insured. Our master electricians carry credentials that meet state licensing requirements, and we stay current on NEC code cycles so your replacement wiring meets the latest compliance standards.

Kochs Electric also coordinates directly with your insurance carrier when needed. Many insurers won’t cover homes with active knob and tube wiring. We provide documentation of completed work so you can get — or keep — your homeowner’s policy. Insurance companies often require written confirmation of completed work before issuing or renewing coverage on a rewired property.

We back every knob and tube replacement with a workmanship guarantee. If something we installed fails, we come back and fix it. Serving Indianapolis, Carmel, Fishers, and throughout Indiana – call (317) 680-7907 to schedule a knob and tube inspection and estimate.

Recent projects include a 1923 Indianapolis craftsman home where the original knob and tube wiring was still partially active in the attic and basement – full rewire with NMB Romex, new 200A Square D breaker panel, AFCI protection on all bedroom circuits, and permit inspection passed before the homeowners listed the property; and a 1941 Carmel bungalow where the insurance carrier had declined renewal, completed rewire documented and submitted to the carrier within the policy grace period with coverage reinstated.

knob and tube wiring replacement wide
knob and tube wiring replacement square

Ready to Get Started?

Contact our licensed team today for a clear, written quote with no surprises. We serve all of Indiana.

Call (317) 680-7907

Signs You Need Knob and Tube Wiring Replacement

1

Your home was built before 1950:

Knob and tube wiring was standard in residential construction from the 1880s through the 1940s. If your home dates to that era and hasn’t been fully rewired, there’s a strong chance knob and tube conductors are still running through your walls, attic, and basement. A licensed electrician can inspect and confirm what’s there.

2

Your breakers trip repeatedly under normal load:

Knob and tube systems were designed for a fraction of the amperage demand modern homes place on circuits. When you run a microwave, refrigerator, and dishwasher on circuits rated for far lower loads, breakers trip — or worse, fuses blow and get replaced with oversized fuses that allow dangerous overloading.

3

Your outlets are two-prong and ungrounded:

Two-prong receptacles are a direct sign of ungrounded wiring. Without a ground conductor, your electronics and appliances have no fault protection path. Replacing knob and tube wiring adds the ground wire that makes three-prong, grounded outlets safe and functional.

4

You smell burning near outlets or switches:

Frayed, damaged insulation on aged knob and tube conductors can arc against wood framing or other conductors. That arcing produces heat and a distinct burning smell near outlets, switches, or junction boxes. This is a hazardous condition that needs immediate diagnosis and rewiring.

5

Your insurance company flagged the wiring:

Insurance carriers routinely deny coverage or cancel policies on homes with active knob and tube wiring. If your insurer has flagged your electrical system as defective or obsolete, knob and tube replacement is the direct path to restoring your coverage.

Fully Licensed & Insured

State of Indiana

We Pull All Permits

You don’t lift a finger

NEC Code Compliant
Every project, every time
Workmanship Guarantee
We come back if anything fails

Our Knob and Tube Wiring Replacement Process

1

Inspection and Diagnosis

A licensed Kochs Electric electrician inspects your panel, traces existing circuits, and uses a multimeter and voltage probe to identify all active knob and tube conductors. We document what we find before any work begins.

2

Permit Filing

We pull the required electrical permit with your local authority having jurisdiction. No knob and tube replacement at Kochs Electric starts without proper permitting in place.

3

De-energizing and Demolition

We de-energize the circuits being replaced at the service panel or disconnect. Old knob and tube conductors are removed where accessible and capped or abandoned in place where removal isn’t feasible.

4

Running New Wire

Our electricians route new copper conductors — NMB Romex cable or armored BX where code requires — through walls, attic spaces, crawl space runs, and basement runs. We staple, clamp, and route every cable to NEC standards.

5

Connecting and Terminating

Each new circuit terminates at a properly rated breaker in your panel. Outlets, switches, and receptacles are connected, grounded, and tested. AFCI and GFCI breakers or devices are installed where required.

6

Final Inspection

We schedule and pass the required inspection with the local authority, then hand you the completed permit documentation.

Brands We Use

Kochs Electric installs materials from trusted, code-compliant manufacturers on every knob and tube replacement project.

Leviton
Leviton
Eaton
Eaton
Hubbell
Hubbell
Southwire
Southwire
Cerrowire 
Cerrowire
Carlon
Carlon
Klein Tools
Klein Tools
Fluke
Fluke
Square D
Square D
Leviton
Leviton
Eaton
Eaton
Hubbell
Hubbell
Southwire
Southwire
Cerrowire 
Cerrowire
Carlon
Carlon
Klein Tools
Klein Tools
Fluke
Fluke
Square D
Square D

Every brand we specify is rated for residential and commercial use, listed by UL, and compliant with the National Electrical Code.

Other Services

Knob and tube wiring replacement

Replace knob and tube wiring

Outdated wiring rewire

Knob and tube rewiring service

Knob and tube electrical upgrade

Old wiring replacement electrician

Residential knob and tube replacement

Home rewiring knob and tube

Ungrounded wiring replacement

Knob and tube wiring removal

Remove knob and tube wiring

Electrical panel upgrade old wiring

Professional knob and tube replacement

Licensed knob and tube electrician

NEC compliant rewiring service

FAQs About Knob and Tube Wiring Replacement

Knob and tube wiring is an early electrical wiring method that uses ceramic knobs to anchor conductors and ceramic tubes to route wire through framing. It runs two conductors — a hot wire and a neutral — with no ground wire, and uses rubber insulation that degrades over decades.

Any knob and tube system that’s still active, overloaded, or showing signs of damaged insulation needs replacement. Most insurance carriers require replacement before they’ll issue or renew a homeowner’s policy on a property with active knob and tube circuits.

Active knob and tube wiring can’t support modern electrical loads. It has no ground conductor, no arc fault protection, and insulation that becomes brittle and frayed over time. A circuit that appears functional can still arc, overheat, or short-circuit without warning.

Most single-family homes take two to five days depending on square footage, the number of circuits, and how accessible the existing wiring is. Kochs Electric gives you a specific timeline after the initial inspection.

Partial replacement is possible, but your insurance carrier may still flag the property if any active knob and tube circuits remain. We’ll tell you exactly what’s there and what your insurer is likely to require.

Yes. Every knob and tube rewiring project requires a permit and a final inspection. Kochs Electric handles both.

Cost depends on home size, circuit count, and accessibility. Kochs Electric provides a detailed written estimate after inspecting your property — no guesswork, no surprise charges. The price is fixed once you approve the estimate, so you know exactly what the electrical work will cost before we start.

Same-Day Emergency Dispatch Available

Indiana's Trusted Residential Electricians

Licensed. Insured. NEC compliant. We pull permits and schedule inspections so you don’t have to. Call us today to get started.