Outdoor & Landscape Lighting Installation
Transform your property’s exterior with professional outdoor and landscape lighting installation from Kochs Electric – wired right, built to last, and designed to perform. Our lighting experts specialize in creating beautiful landscape lighting solutions that enhance your outdoor space and bring life to your entire property – from trees and garden beds to decks, patios, and park-like yard features. Whether you want to elevate the atmosphere of your outdoor living areas or add security and curb appeal, we provide the premium quality service you deserve.
Licensed, Bonded & Insured
NEC Code Compliant
Same-Day Emergency Response
Permits Pulled & Inspections Managed
Workmanship Guarantee
Serving All of Indiana
5 Highlights on Outdoor & Landscape Lighting Installation
Low-voltage landscape wiring done right
Kochs Electric runs, routes, and terminates low-voltage wire using direct-burial UF cable and weatherproof connectors rated for outdoor use — no exposed splices, no shortcuts.
GFCI-protected outdoor circuits
Every outdoor lighting circuit we install includes ground-fault circuit interrupter protection, keeping your fixtures code-compliant and your property safe from electrical faults.
Landscape transformer sizing and installation
We spec, mount, and wire landscape transformers matched to your total wattage load — no overloaded circuits, no flickering path lights or bollard lights.
Smart and automated lighting controls
We program photocell sensors, motion-activated switches, and timer-controlled dimmers so your lighting runs on schedule without manual input.
Full permit and inspection compliance
Kochs Electric pulls permits, prepares load calculations, and coordinates with inspectors to make sure every outdoor lighting installation meets local electrical code.
Our Outdoor & Landscape Lighting Installation Services:
Why Choose Our Outdoor & Landscape Lighting Installation
Founded by Master Electrician David Koch (Indiana License #EC21400047) and serving Indiana homes and businesses since 2008, Kochs Electric brings licensed electrician expertise to every outdoor and landscape lighting project. We carry general liability and workers’ compensation insurance on every job. We don’t subcontract. Our crew handles the full scope – from trenching and conduit routing to fixture mounting, wiring, and final commissioning.
We work with LED-based fixtures, smart-enabled lighting systems, and low-voltage landscape wire across residential and commercial properties. Our electricians are trained to read blueprints, perform load calculations, and select the right circuit breaker and subpanel configuration for your specific lighting layout.
Every installation we complete is weatherproof, UL-listed, and built to handle outdoor conditions year-round. We use direct-burial cable where required, conduit-enclosed wiring in exposed runs, and tamper-resistant weatherproof covers on all outlet boxes.
Our work comes backed by a craftsmanship guarantee. If a connection fails, a fixture flickers, or a circuit trips within the warranty period, we come back and fix it – no charge. Serving Indianapolis, Carmel, Fishers, and throughout Indiana – call (317) 680-7907 to schedule outdoor lighting installation.
Recent projects include a 24-fixture low-voltage LED path and up-light system for an Indianapolis homeowner – VOLT landscape transformer sized to 320W total load, direct-burial runs to each fixture, and photocell timer programmed before commissioning; and an outdoor deck lighting installation for a Carmel homeowner adding a cedar deck, with three weatherproof wall sconces, two post lights, and a GFCI-protected circuit run from the panel through conduit to a new outdoor subpanel serving the deck area.


Ready to Get Started?
Contact our licensed team today for a clear, written quote with no surprises. We serve all of Indiana.
Signs You Need Outdoor & Landscape Lighting Installation
Your path lights flicker or go completely dark:
Flickering or dead path lights usually point to an overloaded landscape transformer, a loose wire nut connection, or corroded low-voltage wire at the splice point. A licensed electrician can test voltage at each fixture, trace the fault, and re-terminate the connections properly.
Your outdoor outlets keep tripping the GFCI breaker:
Repeated GFCI trips on outdoor circuits indicate moisture intrusion, a ground fault in the wiring, or an incompatible fixture drawing too much current. Kochs Electric diagnoses the exact fault using a multimeter and circuit tracer before replacing or rewiring the affected run.
You're adding a deck, patio, or landscaped area:
New construction means new lighting circuits. Installing deck lights, step lights, and up-lights in a freshly landscaped area requires trenching, conduit routing, and a properly sized subpanel circuit. Doing this after the fact costs more and disrupts finished work.
Your existing fixtures aren't weatherproof or outdoor-rated:
Indoor fixtures mounted outside degrade fast. They’re not sealed against moisture, they’re not UL-listed for wet locations, and they create shock hazards. Kochs Electric replaces non-rated fixtures with weatherproof, outdoor-rated LED fixtures wired to code.
You want smart or automated outdoor lighting:
Upgrading to photocell-controlled, motion-activated, or timer-programmed landscape lighting requires more than swapping a bulb. It means wiring smart hubs, programming dimmers, and integrating sensors into your existing electrical panel — work that needs a qualified electrician.
State of Indiana
You don’t lift a finger
Our Outdoor & Landscape Lighting Installation Process
Site Assessment and Load Calculation
We begin with a free consultation and walk the entire property with you, identify fixture locations, and calculate total wattage load. This determines transformer size, circuit count, and wire gauge needed for the installation. Every project starts here – with a custom design plan built around your specific goals and outdoor space.
Design and Permit
Kochs Electric specs the layout, selects compatible LED fixtures and landscape transformers, and pulls the required electrical permit before any work begins. We offer premium fixture options with features suited to every budget and property type – from simple path lighting to fully automated smart systems.
Trenching and Conduit Routing
We trench direct-burial cable runs, route conduit in exposed areas, and bore under hardscape where needed – all with minimal disruption to your existing landscaping and hardscape. All underground wiring meets depth requirements for UF cable and low-voltage wire.
Wiring and Fixture Installation
Our electricians run, pull, and terminate all wiring. We mount fixtures – path lights, flood lights, well lights, wall sconces, and post lights – and connect each one with weatherproof wire nuts and sealed junction boxes.
Panel Connection and Testing
We connect the landscape transformer and outdoor circuits to the main panel or subpanel, energize the system, and test every fixture. We verify voltage at each point, check GFCI protection, and confirm all controls program correctly.
Inspection and Commission
We schedule the final inspection, walk the completed installation with you, and certify the system is code-compliant and fully operational. The result is a lighting experience that perfectly enhances your property and is built to last.
Brands We Use
Kochs Electric installs and wires products from the most trusted names in outdoor and landscape lighting. We select brands based on durability, outdoor ratings, and compatibility with low-voltage and LED systems.




















Every product we install is UL-listed, outdoor-rated, and sourced from verified suppliers.
Other Services
Outdoor lighting installation
Exterior lighting installation
Low-voltage landscape lighting
Landscape lighting installation
Yard lighting installation
LED path light wiring
Outdoor lighting electrician
Residential landscape lighting
GFCI outdoor circuit installation
Landscape lighting wiring
Garden lighting installation
Landscape transformer installation
Outdoor LED lighting installation
Patio lighting installation
Weatherproof outdoor fixture wiring
FAQs About Outdoor & Landscape Lighting Installation
What is outdoor and landscape lighting installation?
It’s the process of wiring, mounting, and connecting exterior light fixtures – path lights, flood lights, well lights, deck lights, and wall sconces – to a power source. This includes trenching for direct-burial cable, installing landscape transformers, and connecting circuits to your main panel or subpanel. Professional landscaping lighting transforms your outdoor space by creating a beautiful landscape atmosphere that is both inviting and functional.
When do I need a permit for outdoor lighting?
Most jurisdictions require a permit when you’re adding new circuits, installing a subpanel, or running wiring from the main panel. Low-voltage landscape lighting connected to a plug-in transformer may not require a permit, but hardwired systems almost always do. Kochs Electric handles the permit process for every applicable job.
Why should an electrician install landscape lighting instead of a landscaper?
Landscape contractors can place fixtures, but only a licensed electrician can legally wire circuits, connect to your electrical panel, and certify the installation meets code. Hiring a qualified lighting expert ensures quality results and the safety of your property and family – ensuring code compliance and eliminating fire and shock hazards, especially in outdoor environments exposed to moisture.
How does a landscape transformer work?
A landscape transformer steps down standard 120-volt household current to 12 volts for low-voltage fixtures. We size the transformer based on total fixture wattage, mount it near an outdoor GFCI outlet, and run low-voltage wire to each fixture location.
Can you install smart outdoor lighting controls?
Yes. Kochs Electric wires and programs photocell sensors, motion-activated switches, timer-controlled dimmers, and smart hub integrations for fully automated outdoor lighting systems. Our lighting experts bring extensive lighting experience to every smart control installation, providing a seamless and reliable system tailored to your outdoor space.
Does outdoor lighting installation increase home value?
Well-installed, code-compliant outdoor lighting improves curb appeal, security, and usability of outdoor spaces – all factors that appraisers and buyers recognize. The key word is “well-installed” – sloppy wiring and non-rated fixtures do the opposite. Our work is also built for easy maintenance, so you can learn how to manage your system and keep it running at peak performance for years. That’s the difference excellent, affordable craftsmanship makes.
Indiana's Trusted Residential Electricians
Licensed. Insured. NEC compliant. We pull permits and schedule inspections so you don’t have to. Call us today to get started.
