Now Serving All of Indiana - Licensed electricians dispatched from Indianapolis.

Emergency calls welcome: (317) 680-7907

Commercial Electrical Design

Expert commercial electrical design services engineered for code compliance, safety, and long-term performance.

State Licensed
Master Electricians
Permit & Inspection Handled
24-Hour Emergency Line
Workmanship Guaranteed

Licensed, Bonded & Insured

NEC Code Compliant

Same-Day Emergency Response

Permits Pulled & Inspections Managed

Workmanship Guarantee

Serving All of Indiana

5 Highlights on Commercial Electrical Design

Full-scope design documentation

Kochs Electric produces single-line diagrams, panel schedules, lighting plans, power plans, and load calculations tailored to your commercial project from ground up to energization.

NEC and AHJ compliance built in

Every design references NFPA 70, local code requirements, and authority having jurisdiction standards so your permit gets approved the first time.

Accurate load calculations and demand analysis

We size feeders, branch circuits, and distribution boards using connected load data, demand factors, and diversity factors to prevent overloaded panels and voltage drop issues.

Coordination with general contractors and engineers

Our electrical designers work directly alongside project managers, electrical engineers, and GCs to align drawings, submittals, and RFIs with the full construction schedule.

Designed for real-world installation

Kochs Electric’s commercial electrical designs account for conduit routing, raceway sizing, wire pull lengths, and seismic bracing so your journeymen and foremen can install without guesswork.

460+
Homes Serviced
92%
Same-Day Response
4+
Years of Experience
100%
Code-Compliant Work

Why Choose Our Commercial Electrical Design

Commercial electrical design is where a project either runs smoothly or falls apart at the rough-in stage. Founded by Master Electrician David Koch (Indiana License #EC21400047) and serving Indiana commercial projects since 2008, Kochs Electric brings qualified master electricians and experienced electrical designers to every project. We carry general liability and workers’ compensation insurance on every engagement. For projects requiring a licensed PE stamp, Kochs Electric coordinates with electrical engineers of record in Indiana to deliver fully stamped permit packages. We don’t hand off generic drawings. We produce construction-ready documentation that reflects actual field conditions.

Our team sizes every panel, subpanel, and distribution board to handle your connected load with room for future expansion. We specify THHN and THWN conductors, EMT and rigid conduit systems, and proper ampacity-rated wire gauges based on your voltage requirements — single-phase or three-phase.

We’ve coordinated commercial electrical designs across office buildings, retail spaces, warehouses, and light industrial facilities. We understand how to route feeders through conditioned and unconditioned spaces, how to detail firestopping at penetrations, and how to produce panel schedules that inspectors and code officials can read without questions.

Every design Kochs Electric delivers is cross-checked against NEC, NFPA 70, and local AHJ requirements before it reaches your hands. We stand behind our drawings through the permit, inspection, and commissioning phases. If an RFI or change order comes up, we respond fast and update documentation accurately. Permit-ready drawing packages for tenant improvements typically take 5 to 10 business days; ground-up commercial builds run 3 to 4 weeks depending on scope. Serving Indianapolis, Carmel, Fishers, and throughout Indiana – call (317) 680-7907 to discuss your project.

Recent projects include a 2,000A, 480V three-phase distribution design for a 120,000 sq ft Indianapolis warehouse – full package including single-line diagram, panel schedules, riser diagrams, and load calculations, achieving permit approval in a single plan check round with zero comments; and a complete electrical design for a 12-unit multi-tenant retail center in Carmel, coordinating with the GC through three RFI cycles and delivering construction-ready documents on the contractor’s schedule without a single revision rejection.

 

commercial electrical design square
commercial electrical design wide

Ready to Get Started?

Contact our licensed team today for a clear, written quote with no surprises. We serve all of Indiana.

Call (317) 680-7907

Signs You Need Commercial Electrical Design

1

You're breaking ground on a new commercial build:

New construction requires a complete electrical design package — power plans, lighting plans, riser diagrams, and load schedules — before the AHJ will issue a permit. Without stamped, code-compliant drawings, your project doesn’t start.

2

Your existing panel is overloaded or undersized:

When breakers trip repeatedly, circuits run unbalanced, or your demand load exceeds your main panel’s rated ampacity, you need a formal load calculation and redesign. Kochs Electric identifies the fault, sizes a replacement distribution board or subpanel, and produces drawings for the upgrade.

3

You're adding equipment — motors, HVAC units, or compressors:

Adding a rooftop unit, air handler, or VFD-driven motor to an existing commercial system requires branch circuit sizing, feeder extension design, and disconnect specification. Skipping the design phase leads to voltage drop, overloaded conductors, and failed inspections.

4

You're retrofitting or upgrading an older facility:

Older buildings often have aluminum wire, outdated fusible switches, or non-metallic conduit that doesn’t meet current NEC standards. A commercial electrical design retrofit identifies what needs replacement, what can be reused, and how to bring the system up to code without tearing out everything.

5

Your insurance or lender requires stamped electrical drawings:

Banks, insurers, and commercial tenants frequently require code-compliant, permitted electrical documentation before closing or occupancy. Kochs Electric produces the drawings, coordinates the permit, and gets the approval documented.

Fully Licensed & Insured

State of Indiana

We Pull All Permits

You don’t lift a finger

NEC Code Compliant
Every project, every time
Workmanship Guarantee
We come back if anything fails

Our Commercial Electrical Design Process

1

Site Assessment and Load Data Collection

We visit your site, measure existing conditions, and gather connected load data for all equipment — lighting, motors, HVAC, receptacles, and specialty circuits. We document panel configurations, available fault current, and utility transformer information.

2

Load Calculation and System Sizing

Our designers run load calculations using NEC demand factors and diversity factors. We size feeders, branch circuits, and overcurrent protection — breakers, fuses, and fusible switches — to match your actual demand load with code-required safety margins.

3

Drawing Production

We draft single-line diagrams, panel schedules, lighting plans, power plans, and riser diagrams. Every drawing identifies conduit types, wire gauges, raceway routing, and device locations — flush-mounted, surface-mounted, or recessed.

4

Code Review and Permit Submission

We review all drawings against NFPA 70 and local AHJ requirements, then submit for permit. We handle RFIs and respond to plan check comments directly.

5

Construction Support and As-Builts

Kochs Electric supports your foremen and journeymen through installation, answers field questions, and produces accurate as-built drawings after commissioning.

Brands We Use

Kochs Electric specifies and works with trusted, listed, and labeled manufacturers whose products meet NEC, UL, and NEMA standards for commercial electrical systems.

Square D
Square D 
Eaton
Eaton
Siemens
Siemens
ABB
ABB
Hubbell
Hubbell
Leviton
Leviton
Lutron
Lutron
Lithonia Lighting 
Lithonia Lighting
Southwire
Southwire
Atkore 
Atkore
Square D
Square D 
Eaton
Eaton
Siemens
Siemens
ABB
ABB
Hubbell
Hubbell
Leviton
Leviton
Lutron
Lutron
Lithonia Lighting 
Lithonia Lighting
Southwire
Southwire
Atkore 
Atkore

Every product Kochs Electric specifies carries UL listing and meets the voltage-rated and ampacity-rated requirements for your commercial application.

Other Services

Commercial electrical design

Commercial electrical design services

Load calculation, panel schedule, single-line diagram

Commercial electrical designer

Commercial electrical design company

NEC compliance, AHJ approval, permit drawings

Commercial electrical drawings

Commercial electrical design plans

Riser diagram, lighting plan, power plan

Commercial electrical load calculation

Commercial electrical system design

Demand load, feeder sizing, branch circuit design

Commercial electrical design contractor

Professional commercial electrical design

Electrical engineer, master electrician, code-compliant design

FAQs About Commercial Electrical Design

Commercial electrical design is the process of planning, sizing, and documenting all electrical systems in a commercial building — including power distribution, lighting, branch circuits, feeders, and overcurrent protection — before installation begins. It produces drawings like single-line diagrams, panel schedules, and lighting plans that guide installation and satisfy permit requirements.

You need it before any new commercial construction, major renovation, equipment addition, or system upgrade. The AHJ requires permitted drawings before rough-in inspections, and lenders or insurers often require stamped documentation before project funding or occupancy.

NEC and NFPA 70 set specific requirements for conductor ampacity, overcurrent protection, voltage drop limits, and raceway fill. A properly executed design catches code violations before installation — not during inspection — which saves time and avoids costly rework.

We calculate connected load for every circuit, apply NEC demand factors, and size feeders, panels, and breakers accordingly. We account for single-phase and three-phase loads, motor starting currents, available fault current, and voltage drop across long feeder runs.

Yes. We’ve designed electrical systems for warehouses, multi-tenant office buildings, retail centers, and light industrial facilities. We coordinate with electrical engineers, general contractors, and project managers throughout design and construction.

Yes. After commissioning, we update all drawings to reflect actual installed conditions — conduit routing, panel configurations, circuit labeling, and device locations — so your facility has accurate documentation for future maintenance and upgrades.

Same-Day Emergency Dispatch Available

Indiana's Trusted Residential Electricians

Licensed. Insured. NEC compliant. We pull permits and schedule inspections so you don’t have to. Call us today to get started.