Now Serving All of Indiana - Licensed electricians dispatched from Indianapolis.

Emergency calls welcome: (317) 680-7907

Parking Lot Lighting Installation

Professional LED parking lot lighting installation that enhances safety and security across parking lots of all sizes, keeps your property visible, and stays code-compliant year-round.

State Licensed
Master Electricians
Permit & Inspection Handled
24-Hour Emergency Line
Workmanship Guaranteed

Licensed, Bonded & Insured

NEC Code Compliant

Same-Day Emergency Response

Permits Pulled & Inspections Managed

Workmanship Guarantee

Serving All of Indiana

5 Highlights on Parking Lot Lighting Installation

Full turnkey installation

Kochs Electric handles everything from trenching and conduit runs to pole mounting, luminaire wiring, and final commissioning, so you get a complete, energized system without coordinating multiple contractors.

LED and photocell-activated fixtures 

We install dusk-to-dawn LED luminaires with integrated photocell sensors and programmable timers, providing superior brightness and consistent light distribution while reducing energy consumption across your lots.

Underground and overhead wiring 

Our journeymen pull weatherproof, rated cable through galvanized conduit built to perform in all weather conditions, whether the run is underground via trencher and auger or overhead on pole-mounted arms, keeping every circuit protected and inspectable.

NEC code compliance and permitting 

Every parking lot lighting installation we complete meets current NEC code requirements, passes local inspection, and includes all required permits and license documentation pulled before work begins.

Phased and balanced circuits

We wire panelboards and breakers to deliver balanced, phased load distribution across all poles and fixtures, helping reduce energy costs and lower energy draw while preventing overloads and reducing long-term maintenance costs.

460+
Homes Serviced
92%
Same-Day Response
4+
Years of Experience
100%
Code-Compliant Work

Why Choose Our Parking Lot Lighting Installation

Founded by Master Electrician David Koch (Indiana License #EC21400047) and serving Indiana businesses since 2008, Kochs Electric brings licensed journeymen and experienced foremen to every parking lot lighting project. We carry general liability and workers’ compensation insurance on every job. We don’t send apprentices to run a job unsupervised. Every crew member knows how to read blueprints, interpret NEC code, and coordinate directly with the utility company when service connections are required.

We pull permits before we break ground. That protects you from liability and guarantees the finished installation passes inspection the first time. Our team uses calibrated voltage testers and multimeters throughout the job, not just at final inspection, so faults get caught before the system is energized.

Our parking lot lighting installations are built to last and reduce maintenance demands over time. We use galvanized steel poles with properly set concrete footings, anchor bolts torqued to spec, and weatherproof junction boxes sealed against moisture intrusion. Every wire termination is clean, labeled, and accessible inside pull boxes and handholes sized for future repairs and serviceability.

We also offer photocell programming, timer relay setup, and motion-sensitive control integration so your lighting system runs automatically without manual switching. Kochs Electric is trusted by commercial property owners, general contractors, and facility managers who need reliable, professional parking lot lighting installation that delivers consistent lighting performance and meets their specific lighting needs. Contact us today at (317) 680-7907 to discuss your project.

Recent projects include a 22-pole Lithonia Lighting DSX2 LED installation across a 280-space retail strip center in Indianapolis – reducing energy draw from 400W metal halide to 145W LED per fixture and cutting the client’s monthly lighting bill by 64%, with all conduit trenching, pole setting, and commissioning completed in four days; and a 14-pole replacement at a medical campus in Carmel, including rebar-reinforced footings, photocell controls, and all permits coordinated with the city building department, passing final inspection on the first visit.

 

parking lot lighting installation square
parking lot lighting installation wide

Ready to Get Started?

Contact our licensed team today for a clear, written quote with no surprises. We serve all of Indiana.

Call (317) 680-7907

Signs You Need Parking Lot Lighting Installation

1

Dark zones across your lot at night:

If sections of your parking lot go unlit after dusk, your existing fixtures, poles, or circuits aren’t covering the area adequately. A proper parking lot lighting installation maps foot-candle levels across the entire surface to IES RP-20 standards (minimum 0.5 foot-candle average maintained for commercial parking facilities), improving visibility for drivers and pedestrians to enhance safety, reduce accidents, and eliminate dark zones completely.

2

Frequent breaker trips on your lighting circuit:

A breaker that trips repeatedly on your parking lot lighting circuit signals an overloaded or faulted system. The issue could be an undersized panelboard, a damaged wire pulling excessive amperage, or a failing ballast drawing more current than the circuit is rated to handle. Our electricians diagnose and repair the issue at the source, rewiring the circuit correctly to restore safe, reliable power to your lots.

3

Corroded or leaning poles:

Galvanized steel poles corrode from the base up when the footing wasn’t sealed properly or the anchor bolts weren’t bonded. A leaning pole is a structural and electrical hazard. Our repair services include replacing the pole, resetting the footing with rebar-reinforced concrete, and re-terminating the wiring to bring the installation back to a safe, compliant condition.

4

Outdated HID or fluorescent fixtures:

Metal halide and high-pressure sodium fixtures consume significantly more wattage than modern LED luminaires and require ballast replacements every few years. A lighting upgrade to rated, listed LED parking and area lighting drivers with full-cutoff housings improves energy efficiency, reduces energy draw, and eliminates recurring ballast failures.

5

No photocell or timer control on existing lights:

Parking lot lights that run on a manual switch or stay on 24 hours waste energy and shorten fixture life. Installing photocell sensors, programmable timers, or relay controllers automates the system, helps reduce energy consumption and reduce maintenance requirements, and gives you precise control over when and how long your lots stay illuminated.

Fully Licensed & Insured

State of Indiana

We Pull All Permits

You don’t lift a finger

NEC Code Compliant
Every project, every time
Workmanship Guarantee
We come back if anything fails

Our Parking Lot Lighting Installation Process

1

Site walk and load calculation

We start by walking the property with blueprints or a site sketch, measuring the lot dimensions across your parking lots, identifying pole locations, and calculating the power load each circuit needs to carry based on fixture wattage and run length to meet your lighting needs.

2

Permit application and utility coordination

Kochs Electric submits all permit applications and coordinates with the utility company for any service upgrades or meter connections required before installation begins.

3

Trenching and conduit installation

Our crew uses a trencher to cut runs for underground conduit, installs galvanized or PVC conduit to the required depth, and seals all entry points into handholes and pull boxes.

4

Pole setting and footing work

We auger each pole hole to the specified depth, set rebar-reinforced concrete footings, and install anchor bolts to manufacturer torque specs before the poles go up.

5

Wire pull and termination

Journeymen pull rated, insulated cable through conduit, terminate each wire at the junction box, panelboard, and fixture driver, and label every circuit for future serviceability.

6

Testing and commissioning

We test voltage, amperage, and phase balance at the panelboard and at each fixture before the system is energized. Photocell sensors and timers are programmed, and the full installation is inspected and signed off.

Ready to schedule a site walk and load calculation? Call (317) 680-7907 or contact Kochs Electric to request a project quote.

Brands We Use

Kochs Electric installs parking lot lighting components from manufacturers with proven track records in commercial outdoor electrical systems. We source fixtures, poles, and controls from brands that carry UL listings and meet NEC compliance standards.

Lithonia Lighting 
Lithonia Lighting 
Eaton
Eaton
Hubbell
Hubbell
Acuity Brands 
Acuity Brands
Leviton
Leviton
Atkore 
Atkore
Philips
Philips
Milbank
Milbank
Lithonia Lighting 
Lithonia Lighting 
Eaton
Eaton
Hubbell
Hubbell
Acuity Brands 
Acuity Brands
Leviton
Leviton
Atkore 
Atkore
Philips
Philips
Milbank
Milbank

Every product we install is listed, rated, and sourced from authorized distributors.

Other Services

Parking lot lighting installation

Commercial parking lot lights

Outdoor LED area lighting

Parking lot light installation service

Lot lighting contractor

Pole-mounted luminaire installation

Professional parking lot lighting

Parking area lighting setup

Full-cutoff LED fixture wiring

Parking lot lighting installer

Exterior lighting installation

Photocell controlled parking lights

Parking lot LED lighting installation

Commercial outdoor lighting install

NEC compliant parking lot wiring

FAQs About Parking Lot Lighting Installation

A complete installation covers trenching, underground conduit runs, pole setting with concrete footings, wire pulls, fixture mounting, panelboard connections, photocell or timer programming, and final testing. Kochs Electric handles every phase from permit to commissioning.

Most commercial parking lot lighting installations take two to five days depending on lot size, the number of poles, and whether underground conduit work is required. We give you a clear timeline before work starts.

LED luminaires consume 50 to 70 percent less wattage than metal halide or high-pressure sodium fixtures, deliver superior brightness with consistent light output, require no ballast replacements, and lower energy and maintenance costs over a rated lifespan of 50,000 hours or more. Reduced energy costs and maintenance costs typically offset installation costs within two to four years.

A photocell sensor reads ambient light levels and automatically switches the circuit on at dusk and off at dawn. We can also wire a timer relay alongside the photocell to shut lights off or dim them during low-traffic overnight hours, reducing energy draw without leaving the lot dark.

Yes. We use directional boring equipment when trenching would damage existing pavement, and we schedule work to minimize interference with business operations. Existing conduit runs can often be reused if they’re in good condition.

Every commercial electrical installation requires a permit. Kochs Electric pulls all required permits, schedules inspections, and ensures the finished system meets current NEC code before the job is closed out.

Same-Day Emergency Dispatch Available

Indiana's Trusted Residential Electricians

Licensed. Insured. NEC compliant. We pull permits and schedule inspections so you don’t have to. Call us today to get started.