Commercial Property Electrical Inspection
Get your commercial property inspected, verified, and certified by qualified electricians who know what’s at stake.
5 Highlights on Commercial Property Electrical Inspection
- Full panel and distribution board assessment — Kochs Electric inspects every breaker, busbar, and switchgear component for signs of overheating, corrosion, and non-compliant wiring that could trigger an overcurrent fault or arc flash event.
- Insulation resistance and continuity testing — Using calibrated Megger test equipment, we measure insulation resistance across all branch circuits, feeder circuits, and service entrance conductors to catch deteriorated or damaged cable before it fails.
- Ground fault and earth loop impedance verification — We test GFCI, RCD, and RCBO devices, verify grounding and bonding conductor integrity, and measure earth loop impedance to confirm your fault protection meets NEC and NFPA standards.
- Thermographic infrared scanning — Our infrared scanning service identifies overloaded conductors, loose terminals, and defective contactors that standard visual inspection can’t detect, giving you a complete thermal picture of your electrical system.
- Compliance documentation and inspection reports — Every inspection produces a detailed compliance report, test certificate, and defect notice where required, so you have a documented record for insurers, auditors, and regulatory bodies.
Why Choose Our Commercial Property Electrical Inspection
Kochs Electric brings licensed, qualified electricians to every commercial property electrical inspection. We don’t send generalists. Every technician on our team is trained in NEC compliance, NFPA 70E arc flash safety, and OSHA electrical standards specific to commercial environments.
We carry full certification and licensing, and we work across a wide range of commercial property types — office buildings, retail spaces, warehouses, industrial facilities, and multi-tenant properties. Our inspection process covers everything from the utility connection and meter base through the main disconnect, sub-panels, distribution boards, and all branch circuits down to receptacles, outlets, and dedicated circuits for HVAC, emergency lighting, and fire alarm systems.
Our team uses professional-grade test equipment including Megger insulation resistance testers, power quality analyzers, and infrared scanning cameras. We don’t estimate or guess. We measure, verify, and document every finding with precision.
Kochs Electric delivers inspection reports that are clear, complete, and actionable. You’ll know exactly what’s compliant, what’s defective, and what remedial work is needed. We also offer follow-up repair and replacement services so you’re not left managing multiple contractors.
Trusted by commercial property owners and facility managers, Kochs Electric is the top-rated choice for professional commercial electrical inspection services.
Signs You Need Commercial Property Electrical Inspection
Tripping breakers or blown fuses on a regular basis: Frequent overcurrent events on your MCB or MCCB panels point to an overloaded circuit, an undersized conductor, or a fault condition developing in your wiring. A commercial property electrical inspection identifies whether the load schedule matches the rated capacity of each circuit and whether breakers are correctly sized and functioning.
Visible damage, corrosion, or deterioration on wiring and panels: Corroded terminals, damaged cable insulation, and deteriorated conduit are direct indicators of a system that needs professional assessment. Left uninspected, these defects escalate into short circuit events, ground faults, or arc flash incidents that put occupants and property at serious risk.
Unexplained increases in energy consumption: A spike in kilowatt demand without a corresponding increase in operational load can signal leakage current, poor power factor, harmonic distortion, or a failing component drawing excess reactive power. Power quality analysis during a commercial electrical inspection pinpoints the source.
Preparing for a change of tenancy, sale, or renovation: Commercial property transactions and major fit-outs require a verified electrical compliance report. Inspecting the service entrance, sub-panels, and all branch circuits before work begins confirms the existing system is safe to energize and capable of supporting new load demands.
Aging electrical infrastructure with no recent inspection record: If your commercial property hasn’t had a documented electrical inspection in the past five years, the system may be non-compliant with current NEC requirements. Switchgear, transformers, and distribution boards degrade over time, and an inspection establishes a current baseline for maintenance and compliance planning.
Our Commercial Property Electrical Inspection Process
Step 1 — Initial Assessment and Documentation Review We start by reviewing any existing single line diagrams, load schedules, schematics, and previous inspection reports. This gives our electricians a clear picture of the system before we arrive on site.
Step 2 — Visual Inspection Our team conducts a thorough visual inspection of all accessible electrical components — panels, switchgear, busbars, conduit, trunking, cable trays, junction boxes, terminals, receptacles, switches, and isolators. We flag exposed, damaged, or illegible labeled equipment immediately.
Step 3 — Instrument Testing We run insulation resistance tests, continuity tests, polarity tests, earth loop impedance measurements, and GFCI/RCD functional tests across all circuits. Where required, we conduct high pot testing and load testing on critical circuits including HVAC, emergency lighting, and fire alarm circuits.
Step 4 — Thermographic Survey Infrared scanning covers all panels, distribution boards, and high-load connection points to detect overheated conductors, loose connections, and defective components that aren’t visible to the eye.
Step 5 — Report and Certification We compile a full inspection report, compliance report, and test certificate. Any defective or non-compliant items appear in a defect notice with clear remedial work recommendations. We walk you through every finding before we leave the site.
Brands We Use
Kochs Electric uses trusted, listed, and approved equipment and components during every commercial property electrical inspection and any associated repair or replacement work.
- Fluke
- Megger
- Flir
- Eaton
- Square D by Schneider Electric
- Siemens
- Leviton
- Hubbell
- Ideal Industries
- Klein Tools
Using certified, approved components keeps your property safe and your inspection documentation clean.
Other Services
| Commercial property electrical inspection | Commercial building electrical inspection | NEC compliance inspection commercial |
| Commercial electrical inspection services | Business electrical inspection | Insulation resistance testing commercial |
| Commercial property electrical compliance | Commercial electrical safety inspection | Earth loop impedance test commercial property |
| Commercial electrical panel inspection | Commercial switchgear inspection | Thermographic survey commercial electrical |
| Professional commercial electrical inspection | Licensed commercial electrical inspector | GFCI RCD testing commercial building |
| Commercial property electrical inspections | Annual commercial electrical inspection | Qualified electrician for commercial inspection |
FAQs About Commercial Property Electrical Inspection
What is a commercial property electrical inspection?
A commercial property electrical inspection is a structured assessment of all electrical systems in a commercial building. It covers the service entrance, main disconnect, sub-panels, distribution boards, branch circuits, wiring, grounding, bonding, and all connected devices. The goal is to verify that everything is safe, compliant, and functioning within rated parameters.
When should you schedule a commercial electrical inspection?
You should schedule an inspection before a property sale or purchase, before a major renovation or fit-out, after a significant electrical fault or fire, when changing tenants, or on a routine five-year cycle. Properties with aging infrastructure or no documented inspection history need one now.
Why does a commercial property need a professional electrical inspection?
Commercial electrical systems carry higher load demands, more complex distribution, and greater fault risk than residential systems. A qualified inspection identifies non-compliant wiring, overloaded circuits, defective breakers, and grounding failures before they cause equipment damage, fire, or injury.
How long does a commercial electrical inspection take?
Inspection time depends on the size and complexity of the property. A small retail space may take two to four hours. A large warehouse or multi-tenant building with multiple sub-panels and dedicated circuits can take a full day or more.
Can Kochs Electric handle repairs found during the inspection?
Yes. Kochs Electric offers repair, replacement, and remedial work services following any inspection. We can de-energize, isolate, replace, and re-energize defective components, and we’ll update your documentation to reflect the corrected system.
Does a commercial electrical inspection include a written report?
Every inspection Kochs Electric completes includes a full inspection report, test certificate, and defect notice where applicable. These documents support insurance requirements, regulatory compliance, and property transaction due diligence.