Now Serving All of Indiana - Licensed electricians dispatched from Indianapolis.

Emergency calls welcome: (317) 680-7907

Short Circuit & Overloaded Circuit Repair

Expert short circuit and overloaded circuit repair that keeps your home or business safe, powered, and code-compliant.

State Licensed
Master Electricians
Permit & Inspection Handled
24-Hour Emergency Line
Workmanship Guaranteed

Licensed, Bonded & Insured

NEC Code Compliant

Same-Day Emergency Response

Permits Pulled & Inspections Managed

Workmanship Guarantee

Serving All of Indiana

5 Highlights on Short Circuit & Overloaded Circuit Repair

Accurate fault diagnosis

Kochs Electric uses clamp meters, multimeters, and circuit testers to pinpoint shorted wires, faulty breakers, and overloaded conductors before any repair work begins.

Full panel and breaker inspection

Every short circuit and overloaded circuit repair includes a thorough check of your breaker box, busbar connections, and distribution panel for tripped, burned, or undersized breakers.

Safe wire repair and replacement

Frayed, exposed, or shorted wiring gets stripped, re-terminated, or fully replaced using rated conductors and proper insulation to restore safe current flow.

Overload correction

When circuits carry more amperage than their rated capacity, Kochs Electric redistributes loads, installs additional circuits, or upgrades undersized breakers to prevent overheating and arc faults.

Code-compliant workmanship

All short circuit and overloaded circuit repairs meet NEC standards, with proper grounding, bonding, and labeling completed on every job.

460+
Homes Serviced
92%
Same-Day Response
4+
Years of Experience
100%
Code-Compliant Work

Why Choose Our Short Circuit & Overloaded Circuit Repair

Founded by Master Electrician David Koch (Indiana License #EC21400047) and serving Indiana homeowners and businesses since 2008, Kochs Electric brings qualified, professional electricians to every short circuit and overloaded circuit repair job. We carry general liability and workers’ compensation insurance on every job. Our team troubleshoots live panels, traces faulty conductors, and repairs defective wiring with precision.

We don’t guess. We measure voltage, test resistance, and read amperage draws before we touch a single wire. That diagnostic discipline means we fix the actual fault — not just the symptom.

Our electricians carry full licensing and insurance. Every repair follows NEC code requirements – including NEC Article 210 for branch circuit sizing and NEC Article 240 for overcurrent protection – and we pull permits where required. You get documented, inspected work that protects your property and satisfies your insurer.

Kochs Electric uses top-rated components — rated breakers, listed connectors, and properly gauged conductors — on every repair. We don’t install undersized or uncertified parts.

We also back our work with a 12-month workmanship warranty. If a repaired circuit trips, faults, or fails within 12 months of our service, we return and correct it at no charge.

Homeowners and commercial clients throughout Indianapolis, Carmel, Fishers, and Indiana rely on Kochs Electric for reliable short circuit and overloaded circuit repair because we show up on time, communicate clearly, and complete the work right the first time. Call (317) 680-7907 for same-day and emergency circuit repair service.

Recent repairs include a repeated breaker trip on a kitchen circuit in a 1972 Indianapolis ranch home – traced to a shorted wire inside a buried junction box behind the dishwasher, re-routed and re-terminated, with power restored in under two hours; and an overloaded 15A circuit in a Carmel retail space where a new espresso machine and refrigeration display were sharing a branch circuit already at capacity, corrected by installing a dedicated 20A circuit per NEC Article 210 requirements and redistributing the load on the panel.

short circuit overloaded circuit repair square
short circuit overloaded circuit repair wide

Ready to Get Started?

Contact our licensed team today for a clear, written quote with no surprises. We serve all of Indiana.

Call (317) 680-7907

Signs You Need Short Circuit & Overloaded Circuit Repair

1

Breakers that trip repeatedly:

A breaker that trips once may just need a reset. A breaker that trips repeatedly under normal load is detecting a real fault — either a shorted conductor, a ground fault, or a circuit carrying more amperage than its rated capacity. Kochs Electric traces the circuit, measures the load, and repairs the underlying cause.

2

Burning smell or scorch marks near outlets or panels:

A burning odor near a receptacle, junction box, or breaker panel signals arcing or overheating conductors. Burned insulation, scorched terminals, and discolored outlet faces all indicate a short circuit or overloaded wire that’s generating dangerous heat. This needs immediate inspection and repair.

3

Flickering or dimming lights under load:

When lights dim every time a large appliance draws current, the circuit is overloaded. The voltage drop is measurable and the conductor is carrying more amperage than it should. Left unrepaired, overloaded circuits overheat, degrade insulation, and create fire risk.

4

Sparking at outlets or switches:

A visible spark when plugging in a device or flipping a switch points to a loose terminal, a shorted wire, or a faulty receptacle. Sparking produces arc flash, which can ignite surrounding materials. Kochs Electric isolates the circuit, inspects the wiring, and replaces defective components.

5

Multiple dead outlets or a dead circuit:

A completely dead circuit often means a tripped breaker, a blown fuse, or a shorted wire that’s interrupted current flow. Kochs Electric tests the circuit from the panel to each outlet, identifies the break or fault, and restores power safely.

Fully Licensed & Insured

State of Indiana

We Pull All Permits

You don’t lift a finger

NEC Code Compliant
Every project, every time
Workmanship Guarantee
We come back if anything fails

Our Short Circuit & Overloaded Circuit Repair Process

1

Initial assessment

Kochs Electric starts every short circuit and overloaded circuit repair with a full walkthrough. We document reported symptoms, inspect the breaker box, and identify tripped, burned, or defective breakers.

2

Circuit testing and fault detection

Our electricians de-energize the affected circuit and test it with a multimeter and clamp meter. We measure resistance, check for ground faults, and read amperage draws to locate the exact fault point.

3

Wire and component inspection

We inspect conductors for frayed insulation, loose terminals, corroded lugs, and shorted connections. Junction boxes, receptacles, and switches along the circuit get checked for damage or improper wiring.

4

Repair and replacement

Damaged wires get stripped and re-terminated or fully replaced. Defective breakers get swapped for properly rated units. Overloaded circuits get redistributed or supplemented with new circuits where needed.

5

Testing and verification

We re-energize the circuit and run a full load test. Voltage, amperage, and continuity readings confirm the repair is complete and the circuit is operating within rated parameters.

6

Documentation and labeling

We label repaired circuits, update panel directories, and provide written documentation of all work completed.

Brands We Use

Kochs Electric installs and repairs using trusted, listed brands that meet NEC standards and carry UL certification. For short circuit and overloaded circuit repair, component quality directly affects safety and longevity.

Square D
Square D 
Eaton
Eaton
Leviton
Leviton
Hubbell
Hubbell
Siemens
Siemens
Lutron
Lutron
Southwire
Southwire
Klein Tools
Klein Tools
Fluke
Fluke
Square D
Square D 
Eaton
Eaton
Leviton
Leviton
Hubbell
Hubbell
Siemens
Siemens
Lutron
Lutron
Southwire
Southwire
Klein Tools
Klein Tools
Fluke
Fluke

Using listed, rated components on every short circuit and overloaded circuit repair means your wiring meets code, performs reliably, and protects your property from electrical hazards.

Other Services

Short circuit repair

Electrical short repair

Shorted wire fix, arc fault repair

Overloaded circuit repair

Circuit overload fix

Tripped breaker repair, overload correction

Short circuit and overloaded circuit repair

Faulty circuit repair

Burned wiring repair, circuit fault diagnosis

Circuit breaker repair

Breaker panel repair

Tripped breaker reset, defective breaker replacement

Electrical fault repair

Wiring fault repair

Ground fault repair, circuit troubleshooting service

FAQs About Short Circuit & Overloaded Circuit Repair

A short circuit happens when a hot wire contacts a neutral wire, a ground, or another conductor it shouldn’t touch. The contact creates a low-resistance path that draws a massive surge of current, trips the breaker, and can cause arcing or fire if the breaker fails to interrupt the fault quickly.

An overloaded circuit carries more amperage than its rated capacity. Plugging too many high-draw appliances into a single circuit, using undersized conductors, or connecting loads that exceed the breaker’s rating all cause overloads. The conductor overheats, insulation degrades, and the breaker trips to interrupt the current.

We de-energize the circuit and use a multimeter to test resistance between conductors. A near-zero resistance reading between the hot and neutral or ground confirms a short. We then trace the circuit through each junction box, outlet, and switch until we locate the fault point.

Yes. A shorted wire generates intense heat and arc flash. If the breaker doesn’t trip fast enough, or if the breaker itself is defective, the heat can ignite insulation, framing, or surrounding materials. Prompt repair is the only way to eliminate that risk.

Most repairs take one to three hours depending on circuit length, accessibility, and fault complexity. Kochs Electric gives you a clear time estimate after the initial diagnostic.

Yes. We repair shorted and overloaded circuits in homes, offices, retail spaces, and light industrial facilities. Single-phase and three-phase circuits both fall within our scope of work.

Same-Day Emergency Dispatch Available

Indiana's Trusted Residential Electricians

Licensed. Insured. NEC compliant. We pull permits and schedule inspections so you don’t have to. Call us today to get started.