Now Serving All of Indiana - Licensed electricians dispatched from Indianapolis.

Emergency calls welcome: (317) 680-7907

UPS System Installation

Professional UPS system installation that keeps your critical loads protected, powered, and running without interruption – delivering reliable backup power solutions and comprehensive system installation services for critical infrastructure and day-to-day operations

State Licensed
Master Electricians
Permit & Inspection Handled
24-Hour Emergency Line
Workmanship Guaranteed

Licensed, Bonded & Insured

NEC Code Compliant

Same-Day Emergency Response

Permits Pulled & Inspections Managed

Workmanship Guarantee

Serving All of Indiana

5 Highlights on UPS System Installation

Full-scope installation services

Kochs Electric provides turnkey wiring, mounting, and commissioning of UPS units for commercial, industrial, and residential applications, including single-phase and three-phase systems from small server rack PDUs to large-scale modular battery-backed configurations

Battery and inverter integration

our electricians connect rectifiers, inverters, and battery banks – including UPS batteries and supporting power equipment – with precision, ensuring each component is properly terminated, torqued, and load-tested before energizing

ATS and bypass switch setup

we install and configure automatic transfer switches and manual bypass switches so your system can transfer loads cleanly during utility faults without dropping critical circuits

Conduit, cable, and panel work

every UPS installation includes properly routed conduit, labeled conductors, fused distribution boards, and balanced phase loading to meet NEC code requirements

Commissioning and runtime testing

after installation, we run load bank tests, calibrate voltage and frequency outputs, and verify autonomy ratings so your UPS performs exactly as specified under real operating conditions

460+
Homes Serviced
92%
Same-Day Response
4+
Years of Experience
100%
Code-Compliant Work

Why Choose Our UPS System Installation

Founded by Master Electrician David Koch (Indiana License #EC21400047) and serving Indiana commercial and industrial facilities since 2008, Kochs Electric brings qualified, expert-level UPS system installation to every job. Our team includes BICSI Installer Level 2 certified technicians for low-voltage and critical infrastructure work, and we carry general liability and workers’ compensation insurance on every project. Our licensed electricians carry hands-on experience with three-phase and single-phase systems across commercial server rooms, industrial switchgear environments, and critical facility applications.

We don’t just mount a unit and walk away. Every installation includes a full schematic review, proper grounding and bonding of all components, and verified conductor sizing matched to the rated ampere load. We torque every terminal connection to spec. We test every circuit before we energize it.

Our team works with modular and scalable UPS architectures, meaning we can configure parallel redundant systems that grow with your load demands. We install surge protectors, capacitors, and line filters where the design calls for them, and we commission each system with a documented load bank test to maintain peak efficiency and deliver comprehensive power solutions.

Kochs Electric is trusted by facility managers, IT directors, and building engineers who need fault-tolerant power protection installed correctly the first time. Proper load management, safety compliance, and uninterrupted operations are the foundation of every project we take on for critical infrastructure. We pull permits, follow blueprints, and coordinate with engineers when the project requires it. Our installations meet NEC, NFPA 70, and manufacturer specifications without shortcuts.

When your uptime depends on a properly installed UPS, you need a licensed Indiana electrical contractor (License #EC21400047, verifiable at in.gov) who treats every connection as a critical one. Serving commercial and industrial facilities throughout Indianapolis, Carmel, Fishers, and Indiana – call (317) 680-7907 to request a quote or discuss your critical power requirements.

Recent installations include a 40kVA Eaton online double-conversion UPS for a 12-rack Indianapolis server room – three-phase input, single-phase output per rack PDU, load bank test confirming 95% efficiency and 18-minute autonomy at full rated load, documentation delivered to the IT director at commissioning; and a parallel-redundant APC by Schneider 20kVA pair for a Carmel medical imaging suite, with bypass switch and fully labeled distribution board, commissioned without interrupting the facility’s live clinical operations.

 

ups system installation square
ups system installation wide

Ready to Get Started?

Contact our licensed team today for a clear, written quote with no surprises. We serve all of Indiana.

Call (317) 680-7907

Signs You Need UPS System Installation

1

Your servers or network equipment run without battery backup:

Any server rack, switch, or storage array connected directly to utility power is unprotected. A voltage sag, surge, or brief outage can corrupt data, crash systems, and damage hardware. A properly installed UPS with a conditioned AC output and surge-protected outlets provides battery backup power and emergency backup power, keeping those loads online through short interruptions and conditioning the power feeding them.

2

Your existing UPS is undersized or overloaded:

If your current unit trips breakers, runs hot, or shows an overloaded fault on its display, it’s not rated for your actual load. Kochs Electric measures your wattage and ampere draw, reviews your distribution board layout, and installs a correctly sized replacement with proper cable and fuse sizing.

3

You're adding a generator but have no transfer switching:

A generator without an ATS creates a dangerous gap. Without a properly wired automatic transfer switch, loads don’t transfer cleanly, and back-feed risk becomes real. We install and configure ATS units that isolate utility and generator sources and transfer your critical circuits safely.

4

Your facility has no redundant power path:

Single-path power distribution means one fault takes everything offline. A parallel redundant UPS installation with a bypass switch gives your facility a fault-tolerant power infrastructure that keeps loads running even during UPS maintenance or component failure.

5

You're commissioning a new data center, medical suite, or industrial control room:

New critical facilities need comprehensive UPS systems designed, installed, and commissioned from the ground up. Kochs Electric works from blueprints and load schedules to wire, rack, and energize the right product – meeting the runtime and autonomy requirements your operation demands.

Fully Licensed & Insured

State of Indiana

We Pull All Permits

You don’t lift a finger

NEC Code Compliant
Every project, every time
Workmanship Guarantee
We come back if anything fails

Our UPS System Installation Process

1

Site assessment and load analysis

We view and inspect your existing panel, distribution board, and load schedule. We measure current draw, identify critical versus non-critical circuits for load management, and confirm the physical space for mounting or racking the UPS unit.

2

System design and equipment selection

Based on your wattage, ampere load, and runtime requirements, we select the right UPS topology and products – online double-conversion, line-interactive, or standby – and specify battery capacity, inverter rating, and bypass switch configuration.

3

Conduit, cable, and panel rough-in

We run conduit, pull conductors, and wire the input and output circuits. We size fuses, install breakers, and label every conductor at both ends per NEC requirements.

4

UPS mounting and component connection

We mount or rack the unit, connect the battery bank, wire the rectifier and inverter terminals, and install the ATS or bypass switch. Every terminal gets torqued to manufacturer spec.

5

Commissioning and load testing

We energize the system, run a load bank test, verify voltage and frequency output, confirm autonomy under rated load, and document all results so you can maintain reliable performance from day one before handing off to the client.

Brands We Use

Kochs Electric installs UPS systems from the most trusted names in power protection.

Eaton
Eaton
APC by Schneider Electric
APC by Schneider Electric
Vertiv
Vertiv
Tripp Lite 
Tripp Lite
ABB
ABB
Socomec
Socomec
Riello UPS
Riello UPS
Eaton
Eaton
APC by Schneider Electric
APC by Schneider Electric
Vertiv
Vertiv
Tripp Lite 
Tripp Lite
ABB
ABB
Socomec
Socomec
Riello UPS
Riello UPS

Choosing a reputable brand matters.

Other Services

UPS system installation

uninterruptible power supply installation

battery backup system wiring

commercial UPS installation

business UPS setup

three-phase UPS commissioning

UPS installation service

UPS unit installation

ATS and UPS wiring service

professional UPS installation

expert UPS system setup

load bank testing electrician

UPS installation electrician

licensed UPS installer

critical power system installation

UPS repairs and repair service

comprehensive maintenance

emergency backup service

FAQs About UPS System Installation

UPS system installation is the process of wiring, mounting, and commissioning an uninterruptible power supply to protect critical electrical loads from outages, surges, and voltage irregularities. It includes connecting the battery bank, inverter, rectifier, bypass switch, and distribution circuits to a properly sized panel or busbar.

You need a UPS installed when you’re running servers, medical equipment, industrial controls, or any load where an unexpected power interruption causes data loss, equipment damage, or operational failure. New construction, equipment upgrades, and generator additions are all common triggers.

A UPS wired incorrectly can fail to transfer loads, back-feed voltage onto a de-energized circuit, or trip breakers under load. A licensed electrician sizes conductors correctly, torques terminals to spec, and commissions the system with a documented load test so you know it works before you depend on it.

Most commercial UPS installations take one to two days depending on system size, conduit routing, and whether an ATS is included. Large modular or three-phase installations in data centers or industrial facilities may take longer based on load schedule complexity.

Yes. We work in existing facilities regularly, running new conduit, tapping into existing panels, and integrating UPS units into live distribution systems using proper isolation and bypass procedures to keep your operation running during the work.

In most jurisdictions, yes. Any new electrical circuit, panel modification, or ATS installation requires a permit and inspection. Kochs Electric pulls all required permits and schedules inspections as part of every installation.

Same-Day Emergency Dispatch Available

Indiana's Trusted Residential Electricians

Licensed. Insured. NEC compliant. We pull permits and schedule inspections so you don’t have to. Call us today to get started.