Now Serving All of Indiana - Licensed electricians dispatched from Indianapolis.

Emergency calls welcome: (317) 680-7907

Smart Home Electrical Installation

Professional smart home electrical installation services – wired, configured, and commissioned by licensed electricians

State Licensed
Master Electricians
Permit & Inspection Handled
24-Hour Emergency Line
Workmanship Guaranteed

Licensed, Bonded & Insured

NEC Code Compliant

Same-Day Emergency Response

Permits Pulled & Inspections Managed

Workmanship Guarantee

Serving All of Indiana

5 Highlights on Smart Home Electrical Installation

Licensed electricians wire and commission every system

Kochs Electric handles the full scope of smart home electrical installation, from running low-voltage wire and CAT6 cable to mounting smart panels and configuring Z-Wave and Zigbee devices to your exact specifications.

Whole-home integration across lighting, security, and energy

We install and pair smart switches, smart dimmers, occupancy sensors, smart thermostats, smart locks, video doorbells, and EV chargers into a single, unified home automation system and controller.

Code-compliant work on every job

Every circuit, junction box, and smart breaker we install meets NEC and local code requirements, and we pull permits and schedule inspections so your certificate of occupancy stays clean.

Scalable, modular systems built for upgrades

We design your smart home electrical installation to grow. Adding a smart outlet, a new scene controller, or a whole-home energy monitor later is straightforward when the infrastructure is wired correctly from the start.

Trusted brands, tested equipment 

We spec and install UL-listed, Matter-compatible, and interoperable devices from the industry’s most reliable manufacturers, so your system stays connected and fault-tolerant for years.

Full Scope

Our Smart Home Electrical Installation Services:

460+
Homes Serviced
92%
Same-Day Response
4+
Years of Experience
100%
Code-Compliant Work

Why Choose Our Smart Home Electrical Installation

Smart home electrical installation is not a DIY project. Founded by Master Electrician David Koch (Indiana License #EC21400047) and serving Indiana homeowners since 2008, Kochs Electric combines line-voltage electrical work with low-voltage data cabling, wireless protocol configuration, and smart device commissioning – the full scope handled by one licensed crew. We carry general liability and workers’ compensation insurance on every project.

Kochs Electric brings master electrician oversight to every smart home electrical installation we take on. Our journeymen and apprentices are trained on both the NEC and the configuration platforms – Lutron, Control4, SmartThings, Google Home, Amazon Alexa, and HomeKit – so the electrical infrastructure and the automation system work together from day one.

We run dedicated branch circuits for high-draw devices like Level 2 EV chargers (electric vehicle charging stations) and whole-home audio amplifiers. We route conduit and low-voltage raceway cleanly through walls, attics, and crawlspaces. We label every circuit in the panel schedule and deliver as-built wiring diagrams so you always know what’s where and how power flows through your home system.

Our smart home electrical installation work is permitted, inspected, and backed by a workmanship guarantee. Serving Indianapolis, Carmel, Fishers, and throughout Indiana – call (317) 680-7907 to discuss your smart home project.

Recent projects include a Carmel homeowner’s whole-home Lutron integration – 14 smart switches with neutral wires confirmed at each location, motorized shades wired to the Lutron RadioRA 3 processor, and the system configured for sunrise/sunset schedules and voice control through Google Home before we left; and an Indianapolis new construction with a Control4 backbone, including in-wall ethernet for every room, dedicated circuits for AV equipment in the media room, and the smart panel commissioned with the builder before CO inspection.

smart home electrical installation square
smart home electrical installation wide

Ready to Get Started?

Contact our licensed team today for a clear, written quote with no surprises. We serve all of Indiana.

Call (317) 680-7907

Signs You Need Smart Home Electrical Installation

1

Your panel can't support smart home loads:

A 100-amp load center with no open breaker slots can’t feed a Level 2 EVSE charging station, a smart thermostat for a multi-zone HVAC controller, and a battery backup storage system at the same time. Rising utility rates and grid outages are making whole-home battery backup and home power management essential for Indiana homes. If your service entrance is undersized or your subpanel is full, a smart home electrical installation starts with a panel upgrade and a proper load calculation.

2

Your switches and dimmers aren't compatible with smart devices:

Standard toggle switches and TRIAC dimmers don’t work with smart bulbs or LED drivers that require a neutral wire. If you’re getting flickering lights, buzzing dimmers, or smart switches that won’t pair, the wiring behind the wall plate is the problem – not the device. We rewire switch boxes, add neutral wires, and install smart dimmers rated for your specific LED strip or luminaire load.

3

Your wireless devices drop off the network:

A Z-Wave or Zigbee mesh network needs enough mains-powered devices to relay signals reliably. If your smart lock, flood sensor, or door sensor keeps going offline, the mesh is too thin. We install additional smart outlets and hardwired smart switches at strategic points to extend coverage and stabilize the network.

4

You want whole-home audio, security cameras, and lighting on one controller:

Integrating a Lutron lighting system, a Crestron AV matrix, and a security camera network into a single keypad or touchscreen requires structured low-voltage cabling – CAT6A, coaxial cable, and fiber optic runs – pulled through conduit before walls close. Retrofitting that cabling later is expensive and disruptive to every living space in the home. We plan and install it correctly during the smart home electrical installation phase.

5

Your energy bills are high and you have no visibility into consumption:

A whole-home energy monitor or smart meter paired with smart breakers and a solar PV inverter gives you real-time kilowatt-hour data by circuit. Without that infrastructure wired in, your home remains blind to actual utility rates and rising energy costs. We install and commission energy monitoring systems that connect directly to your home automation controller, giving you full home power visibility across every circuit – including backup capacity so your home remains operational during public safety power shutoff events and utility outages. Public safety and safety power continuity depend on having the right infrastructure in place.

Fully Licensed & Insured

State of Indiana

We Pull All Permits

You don’t lift a finger

NEC Code Compliant
Every project, every time
Workmanship Guarantee
We come back if anything fails

Our Smart Home Electrical Installation Process

1

Site Walk and Load Calculation

We inspect your existing panel, service entrance, and wiring. We document open breaker slots, measure available amperage, and map out where conduit, raceway, and low-voltage cable need to run. We deliver a one-line diagram and panel schedule before any work starts.

2

Permit and Plan Approval

We submit wiring diagrams and specifications to the local authority having jurisdiction, pull the electrical permit, and schedule the rough-in inspection. No work goes behind drywall without a signed-off inspection.

3

Rough-In Wiring

We run NM cable, THHN, CAT6, and low-voltage wire through conduit and raceway to every outlet box, switch box, junction box, and panel location. We fish wire through finished walls where needed and install all enclosures and knockouts.

4

Device Installation and Termination

We mount and terminate every smart switch, smart dimmer, smart outlet, occupancy sensor, smart thermostat, smart lock, video doorbell, and security camera. We crimp, splice, and label every conductor to match the circuit directory.

5

Configuration and Commissioning

We configure the home automation controller, pair all Z-Wave, Zigbee, Wi-Fi, and Thread devices, program scenes, schedules, and triggers, and test every circuit and automation routine end to end.

6

Final Inspection and Documentation

We schedule the final inspection, deliver as-built drawings, and walk you through operating your system.

Brands We Use

Kochs Electric installs smart home electrical equipment from manufacturers with proven track records for reliability, interoperability, and safety compliance. Every device we spec is UL-listed or ETL-listed and rated for its installed environment.

Lutron
Lutron
Leviton
Leviton
Eaton
Eaton
Siemens
Siemens
Legrand
Legrand
Nest Protect
Nest
Ring
Ring
Control4 
Control4
Emporia Energy 
Emporia Energy
ChargePoint
ChargePoint
Lutron
Lutron
Leviton
Leviton
Eaton
Eaton
Siemens
Siemens
Legrand
Legrand
Nest Protect
Nest
Ring
Ring
Control4 
Control4
Emporia Energy 
Emporia Energy
ChargePoint
ChargePoint

We only install equipment that meets NEC requirements and carries current UL or ETL certification.

Other Services

Smart home electrical installation

Smart home wiring service

Home automation electrician

Smart home electrical installer

Residential smart home electrician

Smart switch and dimmer installation

Smart home electrical setup

Home automation electrical work

Z-Wave Zigbee wiring and configuration

Smart home panel upgrade

Electrical panel for smart home

Smart breaker and energy monitor installation

Smart home low-voltage wiring

CAT6 and data cable installation

Structured wiring for home automation

FAQs About Smart Home Electrical Installation

Smart home electrical installation is the process of wiring, mounting, configuring, and commissioning electrical devices and automation systems in a residence. It covers line-voltage work – panels, circuits, smart switches, smart outlets – and low-voltage work – CAT6 cabling, Z-Wave and Zigbee devices, smart thermostats, security cameras, and home automation system controllers. The end result is a fully integrated home system that connects every device in your living space through a unified automation system.

We start with a load calculation and site inspection, pull permits, run conduit and cable, install and terminate devices, then configure and commission the automation platform. Every step follows NEC code and local inspection requirements.

Any work involving your panel, service entrance, branch circuits, or hardwired devices requires a licensed electrician. Swapping a smart switch, installing a Level 2 EV charger, adding a subpanel, or running new circuits all fall under licensed electrical work in most jurisdictions.

Many can, but older wiring without a neutral wire in switch boxes limits your smart switch options. Panels under 200 amps may need upgrading before you add EV chargers or battery storage. We assess your existing infrastructure and tell you exactly what needs upgrading before we recommend any devices.

Yes. Any new circuit, panel modification, or hardwired device installation requires an electrical permit and inspection in most municipalities. Kochs Electric handles the permit process from submittal through final inspection.

A single-room lighting and switch installation takes a few hours. A whole-home installation covering lighting, security, energy monitoring, EV charging, and AV integration typically runs two to five days depending on the size of the home and the scope of the panel work.

We configure systems on Google Home, Amazon Alexa, Apple HomeKit, SmartThings, Control4, and Lutron. We also commission standalone systems using Z-Wave, Zigbee, Wi-Fi, Thread, and Matter protocols depending on your device ecosystem.

Same-Day Emergency Dispatch Available

Indiana's Trusted Residential Electricians

Licensed. Insured. NEC compliant. We pull permits and schedule inspections so you don’t have to. Call us today to get started.