Now Serving All of Indiana - Licensed electricians dispatched from Indianapolis.

Emergency calls welcome: (317) 680-7907

Whole-Home Surge Protection

Protect every circuit, outlet, and appliance in your home from power surges with professional whole-home surge protection installed by Kochs Electric. Our comprehensive surge protection services are designed for homeowners who want reliable house surge protection across their homes and properties.

State Licensed
Master Electricians
Permit & Inspection Handled
24-Hour Emergency Line
Workmanship Guaranteed

Licensed, Bonded & Insured

NEC Code Compliant

Same-Day Emergency Response

Permits Pulled & Inspections Managed

Workmanship Guarantee

Serving All of Indiana

5 Highlights on Whole-Home Surge Protection

Full-service coverage at the main panel

Whole-home surge protection installs directly at your service entrance, so every branch circuit, sub-panel, and downstream outlet gets shielded from transient voltage spikes before they reach your devices.

MOV-based suppression technology

Metal-oxide varistors clamp overvoltage events in nanoseconds, diverting excess current away from conductors and receptacles throughout your home.

NEC-compliant, UL-listed devices

Every SPD (surge protective device) Kochs Electric installs meets ANSI, IEEE, and NEMA standards, and our work is permitted, coded, and inspected.

Joule-rated capacity you can count on

We size each whole-home TVSS unit to match your service amperage, whether you run a 100-amp or 400-amp single-phase residential system.

Indicator light and alarm monitoring

Installed units include status indicators so you know your surge protection is active, absorbing, and functioning after every electrical event.

460+
Homes Serviced
92%
Same-Day Response
4+
Years of Experience
100%
Code-Compliant Work

Why Choose Our Whole-Home Surge Protection

Founded by Master Electrician David Koch (Indiana License #EC21400047) and serving Indiana homeowners since 2008, Kochs Electric installs whole-home surge protection with the precision and accountability that licensed residential electricians bring to every job. We carry general liability and workers’ compensation insurance on every installation. We don’t guess at joule capacity or clamping voltage ratings. We assess your service entrance, evaluate your panel configuration, and select a UL-listed SPD that matches your actual load requirements.

Our electricians are licensed, insured, and certified, and trained to work on live service equipment safely. We de-energize the appropriate circuits, torque every connection to spec, and test the installation before we leave. Our team ensures every job gets inspected and documented.

We use only NEC-compliant surge protective devices with proven let-through voltage ratings and fast response times. We don’t cut corners on bonding, grounding, or conductor sizing. A poorly installed surge protector can fail silently, create a fault condition, or leave your electrical system without a proper layer of defense – exposing your valuable electronics to excess voltage, potential damage, and even electrical fires. We make sure yours works.

Kochs Electric backs its whole-home surge protection installations with a workmanship warranty. If something isn’t right, we come back and fix it. Most residential whole-home SPD installations run $300 to $800 installed including permit fees. Serving Indianapolis, Carmel, Fishers, and throughout Indiana – call (317) 680-7907 to schedule a site assessment.

Recent installations include a Siemens Type 2 SPD at a 200A main panel for an Indianapolis homeowner whose HVAC control board had failed twice in three years – no equipment failures in the 18 months since installation; and an Eaton whole-home surge protector for a Carmel homeowner with a home office and smart home system after a nearby lightning strike caused a voltage spike that killed two network switches, completed in two hours with permit inspection passed the same week.

whole home surge protection wide
whole home surge protection square

Ready to Get Started?

Contact our licensed team today for a clear, written quote with no surprises. We serve all of Indiana.

Call (317) 680-7907

Signs You Need Whole-Home Surge Protection

1

Your appliances or electronics fail earlier than expected:

Repeated exposure to small transient voltage spikes degrades motors, compressors, and circuit boards over time. If your HVAC system, refrigerator, or washer is failing ahead of its rated lifespan, cumulative overvoltage events from the utility feed may be the cause. Common power surges are also caused by appliances cycling on and off, creating sudden swings in electrical demand that accelerate wear and lead to costly replacements. Whole-home surge protection suppresses those transients before they reach your equipment.

2

You've had a lightning strike nearby:

A nearby lightning event can send a massive voltage spike through your service entrance and into every connected circuit. If you’ve experienced flickering lights, tripped breakers, or dead outlets after a storm, your wiring and devices absorbed that energy. Installing a whole-home SPD at the main panel protects against future lightning strikes and shields your entire electrical system from destructive surges.

3

Your home has older wiring or an aging panel:

Older residential panels and ungrounded or uninsulated conductors are more vulnerable to transient interference and harmonic noise from the utility grid. Kochs Electric can inspect your panel, diagnose any existing fault conditions, and install a surge protective device rated for your service. Our electrical inspections help identify vulnerabilities before they become expensive problems – protecting your valuable assets and keeping your electrical services running reliably.

4

You run sensitive electronics or home office equipment:

Computers, smart home systems, and medical devices are especially vulnerable to EMF interference and voltage spikes. Smart devices and valuable electronics face constant electrical stress from unregulated power – and repeated surges can eventually trigger electrical fires or total device failure. Point-of-use surge strips don’t provide the upstream protection that a whole-service SPD delivers at the meter or main panel.

5

Your utility provider has frequent switching transients:

Utility grid switching, power restoration after outages, and load changes on the distribution network generate transient spikes that travel downstream into your home. If your lights flicker regularly without an internal cause, your service entrance is absorbing those events. A whole-home surge protector installed at the service entrance stops them at the source – ensuring clean electricity throughout your home and maintaining electrical safety for your family.

Fully Licensed & Insured

State of Indiana

We Pull All Permits

You don’t lift a finger

NEC Code Compliant
Every project, every time
Workmanship Guarantee
We come back if anything fails

Our Whole-Home Surge Protection Process

1

Assessment and evaluation

We inspect your main panel, sub-panel configuration, service entrance, and grounding system. We check amperage, identify your single-phase or three-phase setup, and confirm your grounding and bonding are code-compliant before we install anything.

2

Device selection

We select a UL-listed, NEC-compliant SPD with the correct joule capacity, clamping voltage, and let-through voltage rating for your service. We match the device to your panel’s breaker configuration and available mounting space.

3

Safe de-energization

We disconnect and de-energize the appropriate circuits at the main breaker or service disconnect. We follow all safety protocols before we open the panel enclosure or touch any hot conductors.

4

Installation and connection

We mount the SPD in or adjacent to the main panel, connect the hot, neutral, and ground conductors, torque all terminals to manufacturer spec, and verify proper bonding to the grounding system.

5

Testing and inspection

We re-energize the service, test the SPD’s indicator light and status function, verify no fault conditions exist, and walk you through what the device does and how to monitor it. We document the installation for permit and inspection purposes. Thorough electrical inspections help ensure every component of your surge protection solutions is working correctly before we consider the job complete.

Brands We Use

Kochs Electric installs whole-home surge protection devices from trusted, industry-recognized manufacturers. Every brand we use produces UL-listed, NEC-compliant SPDs with verified clamping voltage and joule ratings.

Eaton
Eaton
Siemens
Siemens
Square D
Square D
Leviton
Leviton
Intermatic
Intermatic
Hubbell
Hubbell
ABB
ABB
Lutron
Lutron
Legrand
Legrand
GE
GE
Eaton
Eaton
Siemens
Siemens
Square D
Square D
Leviton
Leviton
Intermatic
Intermatic
Hubbell
Hubbell
ABB
ABB
Lutron
Lutron
Legrand
Legrand
GE
GE

We never install uncertified or unlisted equipment.

Other Services

Whole-home surge protection

Whole-house surge protector

SPD installation residential

Surge protection installation

Home surge suppressor install

Transient voltage suppression

Whole-home surge protector

Main panel surge protection

MOV surge device electrician

Residential surge protection

Service entrance surge protector

NEC-compliant surge protective device

Surge protector installation service

Whole-service surge suppression

Clamping voltage let-through protection

Surge protection solutions

Protection solutions

Services surge protection

FAQs About Whole-Home Surge Protection

Whole-home surge protection is a surge protective device (SPD) installed at your main electrical panel or service entrance. It clamps transient voltage spikes and diverts excess current before it travels downstream to your circuits, outlets, and connected appliances – protecting the flow of clean electricity throughout your home.

The SPD uses metal-oxide varistors (MOVs) to detect overvoltage events. When voltage exceeds the device’s clamping threshold, the MOVs absorb and divert the excess energy to the grounding system in nanoseconds, protecting everything connected to your panel.

Install one now, before a surge event occurs. Transient spikes from lightning, utility switching, and large motor loads happen without warning. Waiting until after damage occurs means replacing appliances, electronics, and wiring that a properly rated SPD would have protected. If you have questions about your surge protection needs, contact Kochs Electric to schedule an appointment.

Point-of-use surge strips only protect devices plugged directly into them. They don’t protect hardwired appliances like your HVAC system, water heater, or refrigerator. A whole-home SPD at the service entrance protects every circuit in the building simultaneously.

Yes. We install whole-home surge protection on single-phase residential panels, sub-panels, and branch circuit configurations. We assess your existing panel before recommending a device to make sure the installation is safe, code-compliant, and correctly sized for your service amperage.

In most jurisdictions, yes. Kochs Electric pulls the required permits, completes the installation to NEC standards, and coordinates inspection so your surge protection is fully approved and documented.

Most UL-listed whole-home SPDs are rated for years of continuous service, but their joule capacity depletes with each surge event they absorb. Kochs Electric can inspect and test your existing device, handle any necessary repairs, and replace it if its protection capacity has been exhausted.

Same-Day Emergency Dispatch Available

Indiana's Trusted Residential Electricians

Licensed. Insured. NEC compliant. We pull permits and schedule inspections so you don’t have to. Call us today to get started.