Now Serving All of Indiana - Licensed electricians dispatched from Indianapolis.

Emergency calls welcome: (317) 680-7907

Home Safety Electrical Services

Kochs Electric delivers certified home safety electrical services that protect your family, your property, and your peace of mind.

As a professional electrical company, Kochs Electric provides reliable, expert support for all essential electrical needs in your home. Our qualified electricians ensure your wiring, panels, and protective devices are in excellent condition – addressing common electrical issues before they become serious hazards and keeping your family safe year-round.

State Licensed
Master Electricians
Permit & Inspection Handled
24-Hour Emergency Line
Workmanship Guaranteed

Licensed, Bonded & Insured

NEC Code Compliant

Same-Day Emergency Response

Permits Pulled & Inspections Managed

Workmanship Guarantee

Serving All of Indiana

5 Highlights on Home Safety Electrical Services

GFCI and AFCI protection

Kochs Electric installs ground-fault circuit interrupter and arc-fault circuit interrupter outlets and breakers throughout your home, detecting dangerous current leaks and arc faults before they cause fires or electrocution.

Panel inspection and upgrade

Our licensed electricians inspect your load center, bus bars, and breakers for overloaded circuits, defective fuses, and code violations, then replace or upgrade components to meet current NEC standards.

Knob-and-tube and aluminum wiring assessment

We identify and evaluate legacy wiring systems that pose serious fire and shock hazards, then rewire affected circuits with code-compliant copper wiring and proper insulation.

Smoke detector and carbon monoxide detector wiring

We hardwire interconnected smoke detectors and carbon monoxide detectors to dedicated circuits, ensuring whole-home coverage with battery backup.

Grounding and bonding verification

Our electricians test grounding rods, grounding wires, and neutral bars to confirm your electrical system is properly bonded and grounded against fault currents and voltage surges.

460+
Homes Serviced
92%
Same-Day Response
4+
Years of Experience
100%
Code-Compliant Work

Why Choose Our Home Safety Electrical Services

Founded by Master Electrician David Koch (Indiana License #EC21400047) and serving Indiana homeowners since 2008, Kochs Electric brings licensed, insured, and code-compliant home safety electrical services to every job we take on. We carry general liability and workers’ compensation insurance on every project. Our electricians are trained to inspect, diagnose, and repair electrical hazards that most homeowners never see coming.

We pull permits on every project. That means your work is inspected by a certified electrical inspector and documented for your records. No shortcuts. No guesswork.

Our team troubleshoots live panels, faulted circuits, and exposed wiring with calibrated multimeters and voltage meters. We don’t estimate — we measure, test, and verify before we recommend any repair or replacement.

Kochs Electric works on single-phase and three-phase residential systems. We’ve rewired homes with defective knob-and-tube, replaced overloaded subpanels, and installed tamper-resistant receptacles in homes with young children. We’ve seen the full range of hazardous conditions, and we know how to fix them right.

Every home safety electrical service we complete comes with a written assessment of findings, a clear scope of work, and a satisfaction guarantee. We stand behind our repairs, our installations, and our inspections. Serving Indianapolis, Carmel, Fishers, and throughout Indiana – call (317) 680-7907 for home safety electrical services and emergency response.

Recent safety service calls include a 1968 Indianapolis home where we found aluminum wiring at 14 outlets with corroded connections and no CO/ALR-rated devices – installed approved anti-oxidant compound and listed CO/ALR receptacles throughout, with written documentation accepted by the homeowner’s insurance carrier; and a Carmel home inspection follow-up where tripping breakers led to the discovery of a failed 150A main breaker with visible heat damage on the bus bar, replaced with a new Eaton load center and AFCI breakers on all required circuits.

home safety electrical services wide
home safety electrical services square

Ready to Get Started?

Contact our licensed team today for a clear, written quote with no surprises. We serve all of Indiana.

Call (317) 680-7907

Signs You Need Home Safety Electrical Services

1

Breakers that trip repeatedly:

A breaker that trips under normal load isn’t just inconvenient. It signals an overloaded circuit, a faulted wire, or a defective breaker that can no longer protect the circuit. Kochs Electric will inspect the panel, measure amperage draw, and identify whether the issue is in the breaker, the wiring, or the connected load.

2

Outlets that are warm, discolored, or sparking:

A hot outlet or a receptacle with scorch marks around the face plate indicates a loose terminal, a faulty connection, or an arc fault inside the outlet box. These conditions can ignite surrounding materials. We’ll de-energize the circuit, open the box, and inspect every connection point.

3

Flickering or dimming lights:

Lights that flicker when appliances run point to loose wiring at the switch, a failing neutral connection, or an unbalanced load on the panel. Our electricians will trace the circuit from the fixture back to the breaker and tighten, splice, or replace any defective components.

4

No GFCI protection in wet areas:

Kitchens, bathrooms, garages, and outdoor receptacles require ground-fault circuit interrupter protection under current code. If your home has standard ungrounded outlets in these locations, you’re exposed to serious shock risk. We’ll install GFCI receptacles or GFCI breakers to bring those circuits into compliance.

5

Aluminum wiring throughout the home:

Homes built between 1965 and 1973 frequently used aluminum wiring, which expands and contracts at a different rate than copper. Over time, connections loosen, creating hot spots and fire hazards. Kochs Electric will inspect all aluminum wiring connections, apply approved anti-oxidant compound, and install CO/ALR-rated devices at every outlet and switch.

6

No hardwired smoke or carbon monoxide detectors:

Battery-only smoke and CO detectors can fail silently when batteries die. Hardwired detectors on interconnected circuits ensure whole-home coverage with battery backup – so an alarm in the basement wakes everyone on every floor. NEC code requires interconnected smoke detectors in new construction and when new detectors are installed. Kochs Electric wires and installs hardwired interconnected systems that meet current code.

Fully Licensed & Insured

State of Indiana

We Pull All Permits

You don’t lift a finger

NEC Code Compliant
Every project, every time
Workmanship Guarantee
We come back if anything fails

Our Home Safety Electrical Services Process

1

Schedule and assess

We start with a full walkthrough of your home. Our electrician inspects the service entrance, load center, subpanel, wiring, outlets, switches, and fixtures. We document every defective, hazardous, or non-compliant condition we find.

2

Diagnose and measure

We use a multimeter, ammeter, and voltage meter to test each circuit. We check for ground faults, arc faults, overloaded circuits, and improper grounding. Every reading gets recorded.

3

Present findings

We walk you through what we found, what it means, and what we recommend. We separate urgent safety repairs from code upgrades so you can prioritize based on risk level and budget.

4

Pull permits and complete work

Kochs Electric pulls all required permits before we start. We wire, connect, replace, and install every component to NEC code. We label every circuit, torque every lug, and secure every conduit and cable run.

5

Test and certify

We energize the system, test every outlet, breaker, GFCI, and AFCI device, and verify proper grounding and bonding. We schedule the inspection and provide you with a completed safety report.

Brands We Use

Kochs Electric selects trusted, code-compliant brands for every home safety electrical service we perform. Quality components reduce failure rates and extend the service life of your electrical system.

Square D
Square D 
Leviton
Leviton
Lutron
Lutron
Hubbell
Hubbell
Eaton
Eaton
Siemens
Siemens
Legrand
Legrand
Klein Tools
Klein Tools
Fluke
Fluke
Kidde
Kidde
Square D
Square D 
Leviton
Leviton
Lutron
Lutron
Hubbell
Hubbell
Eaton
Eaton
Siemens
Siemens
Legrand
Legrand
Klein Tools
Klein Tools
Fluke
Fluke
Kidde
Kidde

Every brand we install meets UL listing requirements and NEC compliance standards.

Other Services

Home safety electrical services

Residential electrical safety inspection

GFCI AFCI panel inspection wiring hazards

Home electrical inspection

House wiring safety check

Defective wiring breaker faults grounding

Electrical hazard detection

Electrical safety assessment

Knob-and-tube aluminum wiring arc fault

Panel safety inspection

Breaker box inspection and upgrade

Overloaded circuit load center NEC code

Licensed electrician home safety

Certified residential electrical services

Permitted electrical work code-compliant wiring

FAQs About Home Safety Electrical Services

It’s a comprehensive inspection, testing, and repair service that identifies electrical hazards in your home. Kochs Electric checks your panel, wiring, outlets, grounding, and protective devices to confirm everything meets current NEC code and operates safely.

Schedule one when you’re buying or selling a home, after a storm or flood, when you notice flickering lights or tripping breakers, or if your home is more than 25 years old and hasn’t been inspected recently. Homes with knob-and-tube or aluminum wiring need an assessment right away.

GFCI breakers and outlets detect ground faults — current leaking outside the intended path — and cut power within milliseconds. AFCI devices detect arc faults caused by damaged or loose wiring. Both types of protection prevent electrocution and electrical fires. Current NEC code requires them in kitchens, bathrooms, bedrooms, garages, and outdoor areas.

Most single-family homes take two to four hours depending on size, age, and the number of circuits. Homes with older wiring systems or large panels may take longer.

Yes. We diagnose and repair during the same visit when possible. For larger projects like panel replacements or full rewires, we’ll schedule a follow-up and pull the appropriate permits before starting work.

We pull permits on all work that requires them under local code. Permitted work gets inspected by a certified electrical inspector, which protects you legally and documents the repair for future buyers or insurers.

Same-Day Emergency Dispatch Available

Indiana's Trusted Residential Electricians

Licensed. Insured. NEC compliant. We pull permits and schedule inspections so you don’t have to. Call us today to get started.