Now Serving All of Indiana - Licensed electricians dispatched from Indianapolis.

Emergency calls welcome: (317) 680-7907

Electrical Panel Upgrade & Replacement

Kochs Electric installs, replaces, and upgrades electrical panels for homes, residential properties, and commercial buildings across Indiana – code-compliant work, permitted and inspected every time. Whether your electrical system needs a service panel swap or a full-capacity upgrade, our team delivers efficient electrical panel installation that protects your property and meets current NEC standards.

State Licensed
Master Electricians
Permit & Inspection Handled
24-Hour Emergency Line
Workmanship Guaranteed

Licensed, Bonded & Insured

NEC Code Compliant

Same-Day Emergency Response

Permits Pulled & Inspections Managed

Workmanship Guarantee

Serving All of Indiana

5 Highlights on Electrical Panel Upgrade & Replacement

Full load center replacement

Kochs Electric removes your outdated panel and installs a new, amperage-rated load center with properly torqued lugs, labeled breakers, and a bonded neutral bar and ground bar.

Service entrance upgrades

We pull new feeder conductors, connect the service drop, and wire the main disconnect to handle 200A or 400A service where your current riser and meter base can’t keep up.

Subpanel installation

Our electricians run dedicated feeder circuits from your main panel, mount a flush or surface-mounted subpanel, and route branch circuits to serve garages, workshops, or additions.

AFCI and GFCI breaker upgrades

We swap standard breakers for arc-fault and ground-fault circuit interrupter breakers across required circuits, meeting current NEC code requirements.

Permit and inspection management

Kochs Electric pulls the permit, schedules the inspection, and delivers a fully inspected, code-compliant panel replacement — no shortcuts, no skipped steps.

460+
Homes Serviced
92%
Same-Day Response
4+
Years of Experience
100%
Code-Compliant Work

Why Choose Our Electrical Panel Upgrade & Replacement

Electrical panel replacement isn’t a job for guesswork. Founded by Master Electrician David Koch (Indiana License #EC21400047) and serving Indiana homes and businesses since 2008, Kochs Electric brings licensed, qualified electricians to every panel upgrade. We carry general liability and workers’ compensation insurance on every job. Our experienced team has completed electrical panel upgrades for homeowners, landlords, and businesses across Indiana, delivering safer electrical systems and dependable electricity to every property we serve.

We don’t cut corners on materials. Every load center we install is amperage-rated and short-circuit rated for your specific service. We torque every lug and terminal to spec, label every breaker, and verify every grounding electrode connection before we close the enclosure.

Our electricians carry the permits. We coordinate directly with your local inspection authority, so you’re never chasing paperwork or wondering whether the work passed. You get a signed-off, inspected panel — documented and done.

Kochs Electric has built a trusted reputation on transparent pricing and professional workmanship. We assess your existing service entrance, calculate your actual load, and recommend the right panel size – not the most expensive one. Whether you need a 100A upgrade to 200A or a full 400A service with a new subpanel, we scope the work accurately and complete every project on schedule. We provide solutions that improve efficiency, protect your home, and support the growing electrical demands of modern appliances and technology.

We back our panel replacements with a workmanship guarantee. If something isn’t right, we come back and fix it. Serving Indianapolis, Carmel, Fishers, and throughout Indiana – call (317) 680-7907 for electrical panel upgrades and replacements.

Recent panel projects include a 100A to 200A service upgrade for a 1972 Indianapolis home adding an EV charger and a new HVAC unit – load calculation confirmed the original 100A service was at capacity, new riser, meter base, and Square D 200A load center installed and inspected within two days; and a Federal Pacific Stab-Lok panel replacement for a Carmel homeowner whose insurance carrier required removal before renewal, replaced with a code-compliant Eaton load center with AFCI breakers on all bedroom circuits.

electrical panel upgrade replacement square
electrical panel upgrade replacement wide

Ready to Get Started?

Contact our licensed team today for a clear, written quote with no surprises. We serve all of Indiana.

Call (317) 680-7907

Signs You Need Electrical Panel Upgrade & Replacement

1

Breakers that trip repeatedly:

A circuit breaker that trips under normal load isn’t just inconvenient – it signals that your service panel can’t handle the current demand on that circuit. Frequent breaker trips mean your load center may be undersized or the breaker itself is failing. Kochs Electric troubleshoots the circuit, measures the load, and determines whether a breaker swap or a full panel replacement is the right fix.

2

A fuse box still in service:

Fuse-based panels are outdated and can’t support modern electrical loads. They’re also a red flag for home insurers. Replacing a fuse box with a breaker-protected load center gives you proper overcurrent protection, room for AFCI and GFCI breakers, and a panel that meets current code.

3

Flickering lights or voltage drops:

Lights that dim when an appliance kicks on point to loose terminals, undersized conductors, or a failing main disconnect. These symptoms mean your panel isn’t maintaining stable voltage across branch circuits – a major safety concern. Left unaddressed, loose connections generate heat and create fire risk.

4

No room for new circuits:

If your panel is full — no open knockouts, no available slots — and you’re adding a home office, EV charger, or workshop, you need either a subpanel or a larger load center. Kochs Electric evaluates your existing feeder, calculates available capacity, and installs the right solution.

5

Panel age over 25 years:

Older panels – especially brands with documented safety issues – should be inspected and often replaced. Bus bars corrode, circuit breakers wear out, and older enclosures weren’t designed for today’s major electrical demands. A professional inspection from Kochs Electric identifies what your electrical panel needs before a failure forces the issue.

Fully Licensed & Insured

State of Indiana

We Pull All Permits

You don’t lift a finger

NEC Code Compliant
Every project, every time
Workmanship Guarantee
We come back if anything fails

Our Electrical Panel Upgrade & Replacement Process

1

Site Assessment

Our electrician inspects your existing panel, service entrance, meter base, and grounding electrode system. We identify your current amperage, evaluate the condition of your conductors and bus bars, and assess what the upgrade requires.

2

Load Calculation

We calculate your total electrical load across all branch circuits and feeders. This determines the correct panel size — 100A, 200A, or 400A — and whether your service drop and riser need upgrading alongside the panel.

3

Permit Pull

Kochs Electric submits the permit application before any work starts. No panel replacement proceeds without a permit in hand.

4

De-energize and Disconnect

We coordinate with the utility to de-energize the service entrance. Our electricians disconnect the existing panel safely, following lockout procedures on all live conductors.

5

Install and Wire

We mount the new load center, connect the service entrance conductors to the main lugs, wire the neutral bar and ground bar, install breakers, and run or reconnect all branch circuits. Every terminal gets torqued to spec.

6

Inspection and Energize

The inspector verifies the installation. Once approved, we energize the panel, test each circuit, and label every breaker clearly before we leave. Every project is completed with full documentation – including a signed inspection record – so your electrical systems are covered from day one.

Brands We Use

Kochs Electric installs panels and breakers from manufacturers with proven safety records and reliable overcurrent protection. The brands we work with meet UL listing requirements and NEC compliance standards.

Square D
Square D 
Eaton
Eaton
Siemens
Siemens
Leviton
Leviton
Cutler-Hammer 
Cutler-Hammer
GE
GE (ABB)
Milbank
Milbank
Hubbell
Hubbell
Southwire
Southwire
Klein Tools
Klein Tools
Square D
Square D 
Eaton
Eaton
Siemens
Siemens
Leviton
Leviton
Cutler-Hammer 
Cutler-Hammer
GE
GE (ABB)
Milbank
Milbank
Hubbell
Hubbell
Southwire
Southwire
Klein Tools
Klein Tools

Every panel we install uses listed equipment from reputable manufacturers.

Other Services

Electrical panel upgrade

Panel replacement service

Load center installation

Electrical panel replacement

Breaker box replacement

Service entrance upgrade

Panel upgrade electrician

Main panel upgrade

NEC code-compliant panel

200 amp panel upgrade

Electrical service upgrade

Subpanel installation

Residential panel replacement

Home electrical panel upgrade

AFCI GFCI breaker installation

FAQs About Electrical Panel Upgrade & Replacement

An electrical panel upgrade replaces your existing load center — or increases its amperage rating — so your home or business can handle greater electrical demand. It typically involves installing a new panel, connecting new service entrance conductors, and wiring all branch circuits to the updated load center.

You need a panel replacement when your current panel trips repeatedly, can’t support new circuits, contains outdated fuse-based equipment, or shows signs of heat damage, corrosion, or loose terminals. Panels over 25 years old warrant a professional inspection at minimum.

Panel replacements involve your service entrance — the point where utility power connects to your building. Local codes require a permit and inspection to verify the installation meets NEC standards and that the grounding electrode system, bonding, and overcurrent protection are all correct.

Most residential panel replacements take four to eight hours. A full service upgrade — including a new meter base, riser, and subpanel — can run one to two days depending on the scope.

Yes. Kochs Electric upgrades 100A panels to 200A service regularly. The process involves replacing the load center, upgrading the service entrance conductors, and often replacing the meter base and riser to handle the increased amperage.

A code-compliant, inspected panel replacement removes a common red flag for home buyers and insurers. It’s a documented upgrade that supports your home’s electrical capacity and marketability.

Panel upgrade cost depends on panel size, existing service conditions, permit fees, and whether the service entrance needs upgrading. Kochs Electric provides accurate, itemized estimates after a site assessment – no guesswork pricing.

Yes. Kochs Electric handles both electrical panel installation and installation repair. Whether you need a brand-new service panel installed in a new build, a replacement in an existing home, or a repair to a failing load center, our electricians diagnose the issue and deliver a lasting fix.

Same-Day Emergency Dispatch Available

Indiana's Trusted Residential Electricians

Licensed. Insured. NEC compliant. We pull permits and schedule inspections so you don’t have to. Call us today to get started.